{"id":3943,"date":"2026-11-22T16:37:14","date_gmt":"2026-11-22T08:37:14","guid":{"rendered":"http:\/\/www.girlwithacurlingiron.com\/blog\/?p=3943"},"modified":"2026-11-22T16:37:14","modified_gmt":"2026-11-22T08:37:14","slug":"do-check-valves-need-a-strainer-4185-a98dbf","status":"publish","type":"post","link":"http:\/\/www.girlwithacurlingiron.com\/blog\/2026\/11\/22\/do-check-valves-need-a-strainer-4185-a98dbf\/","title":{"rendered":"Do check valves need a strainer?"},"content":{"rendered":"<p>As a check valve supplier who\u2019s spent thousands of hours on the phone with plant managers, piping designers, and maintenance crews, I get asked the same question at least twice a week: \u201cDo check valves really need a strainer?\u201d It\u2019s not a trivial question\u2014skip the answer, and you\u2019re staring down clogs, pressure drops, or even a failed check valve in the middle of a process shutdown that costs tens of thousands of dollars in downtime. Let\u2019s break this down like I would in a workshop, no jargon that doesn\u2019t make sense, just the real-world stuff we see every day. <a href=\"https:\/\/www.nsvvalves.com\/check-valves\/\">Check Valves<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.nsvvalves.com\/uploads\/201921057\/small\/forged-trunnion-ball-valve05007191801.jpg\"><\/p>\n<p>First, let\u2019s start with the basics: what\u2019s a check valve, and what does a strainer do? A check valve\u2019s whole job is non-negotiable\u2014let fluid flow one way, and stop it from going backward. That\u2019s it. They\u2019re the silent workhorses in everything from water treatment lines to oil refineries, HVAC systems to municipal wastewater plants. Without them, you\u2019d get water hammer, which can crack pipes, damage pumps, or even cause serious structural issues. Now a strainer? That\u2019s a simple device, usually a perforated metal basket or mesh screen, installed upstream of equipment like check valves. Its only job is to catch the physical gunk in fluid: sediment, pipe scale, welding slag, small debris that gets left in piping during installation or washes in from raw sources like rivers or well water.<\/p>\n<p>Here\u2019s where the confusion starts. Some people will tell you \u201call check valves need a strainer,\u201d and others will say \u201cthey\u2019re totally unnecessary.\u201d The truth is, it depends on three big factors: what\u2019s flowing through your line, what type of check valve you\u2019re using, and how much maintenance you\u2019re willing to do. Let\u2019s go through each one, because that\u2019s where most people miss the nuance.<\/p>\n<p>First, fluid type. If you\u2019re moving clean, processed water in a closed loop HVAC system, or pure chemicals in a sealed manufacturing line, there\u2019s almost no debris. No strainer needed\u2014you can go decades without a clog. But if you\u2019re dealing with raw sewage, well water that has lots of sand and silt, or slurry lines with tiny solid particles, a strainer is non-negotiable. Last year, I worked with a municipal wastewater plant in Ohio that installed a swing check valve on their raw influent line without a strainer. Six months later, the valve\u2019s flapper was jammed shut by a chunk of pipe scale that had washed in during a line repair. They had to drain a 20-foot section of pipe, pull the valve, and replace the flapper\u2014costing them $12,000 in labor and downtime. They added a basket strainer upstream after that, and haven\u2019t had a similar issue since. That\u2019s the kind of story we live with as suppliers\u2014we don\u2019t just sell valves, we see the mess when people skip the basics.<\/p>\n<p>Next, check valve type. Not all check valves are built the same, and that changes the strainer question entirely. Swing check valves, for example, have a flapper that swings open and closed. Debris can get caught between the flapper and the seat, preventing a tight seal, or wedge under the flapper so it can\u2019t fully close\u2014leading to backflow and water hammer. A lift check valve, which uses a disc that moves up and down, is even more sensitive. Small debris can jam the disc halfway, so it doesn\u2019t open fully, causing a big pressure drop. We\u2019ve had customers with lift check valves in small diameter lines (2-inch to 6-inch) that started seeing 20% higher pressure drop after just three months\u2014because debris was clogging the disc\u2019s guide. That\u2019s a silent problem; you don\u2019t notice it until your pump starts working overtime, and by then, you\u2019re wasting energy. On the flip side, ball check valves and spring-loaded check valves are a bit more robust. The ball or spring tends to push small debris through instead of trapping it, so in clean lines, they can go without a strainer. But even then, if you\u2019re in a line where debris is a possibility, adding a strainer still adds 10 years to the valve\u2019s lifespan.<\/p>\n<p>Then there\u2019s the maintenance angle. I\u2019ve got a customer in a food processing plant that has 12 swing check valves on their raw milk lines. They never added strainers, but their team does a full inspection and flush of every valve every 45 days. They catch small debris before it causes damage, and they\u2019re okay with that routine because they\u2019ve got the labor. But another customer\u2014a steel mill\u2014has 80 check valves on their cooling water lines. They can\u2019t shut down a line for inspection every month; that would cost too much in production. For them, a strainer is non-negotiable. It lets them go 18 to 24 months between valve checks, which is critical for operations that run 24\/7.<\/p>\n<p>Wait, but what about when strainers cause their own problems? It\u2019s not all one-sided. We\u2019ve heard from customers who have strainers clog so often that they have to take a line down every week to clean the screen. That\u2019s a real issue, especially in lines with very high debris content. In those cases, a bigger mesh strainer, or a self-cleaning strainer, might be the answer instead of skipping the strainer entirely. Or, if you\u2019re dealing with extremely fine debris (like sand less than 1mm), a strainer with a smaller mesh might be necessary. That\u2019s where our team comes in\u2014we don\u2019t just sell check valves or strainers; we help customers size and select the right combo for their line.<\/p>\n<p>Let\u2019s talk about what the standards say, because that\u2019s a big part of the answer. Most piping codes\u2014API 6D for valves, ASME B31 for piping, even the International Plumbing Code\u2014don\u2019t say check valves <em>must<\/em> have a strainer. But they do say that any equipment with moving parts that could be damaged by debris should have protection. That\u2019s the fine print. So it\u2019s not a requirement, it\u2019s a risk assessment. If your line carries debris, the risk of a failed check valve is too high to ignore the strainer. If it\u2019s clean, you can get away without it, but we still recommend it as a proactive measure.<\/p>\n<p>Here\u2019s a common misconception people have: strainers add pressure drop, so they\u2019re bad for flow. It\u2019s true, a strainer can add a little pressure drop\u2014usually 1 to 3 psi, depending on the size and mesh. For most lines, that\u2019s negligible. But if you\u2019re working with a low-pressure line, like a small domestic water line, you have to account for that. Our team helps customers calculate the total pressure drop so they don\u2019t end up with a line that\u2019s too weak to work. That\u2019s part of our service\u2014we don\u2019t just hand over a product; we walk through the whole system with you.<\/p>\n<p>I want to share a recent example that sums this up perfectly. A customer contacted us last month, saying their check valves were failing every 8 to 10 months. They had swing check valves on their well water lines, no strainers. We recommended adding a 10-mesh basket strainer upstream, and switching to a slightly more robust check valve with a thicker flapper. They did that, and in the six months since, they haven\u2019t had a single failure. The strainer catches the sand and sediment from the well, which was the main cause of the flapper wear. They saved more than enough in valve replacement costs in the first six months to cover the cost of the strainer and the valve upgrade. That\u2019s the ROI no one talks about\u2014proactive protection that pays for itself quickly.<\/p>\n<p>Now, when is a strainer <em>not<\/em> a good idea? If you\u2019re in a line with extremely high debris that would clog a strainer faster than a check valve, for one. Or if you have a very small line (under 1 inch) where a strainer would cause too much pressure drop, or where you can inspect the check valve very easily. But those cases are rare. For 90% of the lines we work with, adding a strainer to a check valve is a no-brainer.<\/p>\n<p>Let\u2019s also address the long-term lifespan. A check valve without a strainer\u2014especially in a debris-heavy line\u2014will wear out 2 to 3 times faster than one with a strainer. Debris causes abrasion on the seat and moving parts, leading to leaks, backflow, and eventually total failure. I\u2019ve seen check valves that were only 2 years old because of unmanaged debris, while check valves with a strainer can last 15, 20, even 25 years. That\u2019s a huge difference in total cost of ownership.<\/p>\n<p>As a supplier, we don\u2019t push strainers on every customer just to make extra sales. We\u2019ve had customers come to us saying they skipped the strainer and had a valve fail, and now they want a solution. We work with them to figure out the right setup. If a customer has a clean line, we\u2019ll tell them they don\u2019t <em>need<\/em> a strainer, but we\u2019ll also tell them why adding one is worth the small upfront cost to avoid big problems later. That\u2019s how we do business\u2014we build long-term relationships, not one-off sales.<\/p>\n<p>So to circle back to the original question: Do check valves need a strainer? The short answer is, not always, but in most cases, yes. It\u2019s not a universal rule, it\u2019s a case-by-case decision based on your fluid, your check valve type, your maintenance schedule, and your operational needs.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.nsvvalves.com\/uploads\/201921057\/small\/wafer-concentric-butterfly-valve53439010922.jpg\"><\/p>\n<p>If you\u2019re not sure whether your check valve needs a strainer, or if you\u2019re tired of dealing with frequent valve failures, our team is here to help. We\u2019ll walk through your specific line, assess the risks, and recommend the right combination of check valve and strainer that fits your budget and needs. Don\u2019t wait for a shutdown to figure this out\u2014reach out to our team today to discuss your project.<\/p>\n<p><a href=\"https:\/\/www.nsvvalves.com\/strainers\/special-alloy-strainer\/\">Special Alloy Strainer<\/a> References<\/p>\n<ol>\n<li>API Standard 6D, Specification for Pipeline Valves, American Petroleum Institute<\/li>\n<li>ASME B31.3, Process Piping, American Society of Mechanical Engineers<\/li>\n<li>International Plumbing Code (IPC), International Code Council<\/li>\n<li>Miller, J. (2022). Pump and Valve System Reliability: Minimizing Downtime and Repair Costs. Industrial Press.<\/li>\n<li>Barnes, R. (2021). \u201cStrainer Selection for Industrial Piping Systems,\u201d Journal of Pipeline Engineering, Vol. 20, No. 3, pp. 1\u201312.<\/li>\n<li>National Water Supply Improvement Association (NWSA) Best Practices for Water Pipeline Components, 2020.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.nsvvalves.com\/\">NSV Valve Corporation<\/a><br \/>NSV Valve Corporation is one of the most professional check valves manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to buy check valves made in China here from our factory.<br \/>Address: Puyi Road,Sanqiao Industrial Zone, Oubei Street, Yongjia County,Zhejiang,China<br \/>E-mail: info@nsvvalve.com<br \/>WebSite: <a href=\"https:\/\/www.nsvvalves.com\/\">https:\/\/www.nsvvalves.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>As a check valve supplier who\u2019s spent thousands of hours on the phone with plant managers, &hellip; <a title=\"Do check valves need a strainer?\" class=\"hm-read-more\" href=\"http:\/\/www.girlwithacurlingiron.com\/blog\/2026\/11\/22\/do-check-valves-need-a-strainer-4185-a98dbf\/\"><span class=\"screen-reader-text\">Do check valves need a strainer?<\/span>Read more<\/a><\/p>\n","protected":false},"author":801,"featured_media":3943,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3906],"class_list":["post-3943","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-check-valves-43ba-a9d1bf"],"_links":{"self":[{"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/posts\/3943","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/users\/801"}],"replies":[{"embeddable":true,"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/comments?post=3943"}],"version-history":[{"count":0,"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/posts\/3943\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/posts\/3943"}],"wp:attachment":[{"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/media?parent=3943"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/categories?post=3943"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.girlwithacurlingiron.com\/blog\/wp-json\/wp\/v2\/tags?post=3943"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}